Associate Logout
Refer a Friend

Wireless Tag List

User Manual

Wireless Settings (Advanced)

Wireless Settings Migration allows you to re-program the flash memory in each tag to
  1. use a different frequency to resolve interference problems, and
  2. fine tune the trade-off among range, battery life and response time.
Old Setting
New Setting
Cancel

Enable/Disable Push Notifications on Phones

Save
Cancel

Save
When Tag has gone out of range
Cancel

Account Settings

Save
Tag Managers
Cancel

Add a Tag Manager

Adding multiple tag managers to one account allows quickly switching between tag managers, managing more than 255 tags and covering wider area than a single tag manager can cover.

Group With...

When a tag manager is grouped with another tag manager, they share the same list of tags and radio ID. Up to 255 tags are supported in one group no matter how many tag managers are in that group. A tag may be out of range from one tag manager but responding to another. A tag may also be reachable from both tag managers. This is useful when multiple tag managers are set up to cover wider areas, and a tag may "roam" from one manager to another.

Cancel

Save
When lost link to a tag - {0}: Tag name, {1}: Time since last update
When re-established link to a tag - {0}: Tag name, {1}: Time since last update (lost link duration)
When motion tag detected motion - {0}: Tag name, {1}: Orientation change
When Infra-red (PIR) sensor detected motion - {0}: Tag name, {1}: local time
When motion tag or Infra-red (PIR) sensor times out - {0}: Tag name, {1}: local time
When door is opened - {0}: Tag name, {1}: Orientation change since armed
When door is closed - {0}: Tag name, {1}: Orientation change since armed
When door is open for too long - {0}: Tag name, {1}: Orientation change since armed, {2}: How long
When temperature is too high - {0}: Tag name, {1}: Temperature in °F, {2}: Temperature in °C
When temperature is too low - {0}: Tag name, {1}: Temperature in °F, {2}: Temperature in °C
When temperature returned to normal - {0}: Tag name, {1}: Temperature in °F, {2}: Temperature in °C
When tag battery is low - {0}: Tag name, {1}: latest battery voltage, {2}: configured low battery warning threshold
When moisture level is too high - {0}: Tag name, {1}: moisture level in %
When moisture level is too low - {0}: Tag name, {1}: moisture level in %
When moisture level returned to normal - {0}: Tag name, {1}: moisture level in %
When detected water - {0}: Tag name, {1}: local time
Cancel

Save
Cancel

Save
Cancel

Save
Outlet frequency:
Cancel

Save
Units:
Cancel

Save
Cancel

Save
Cancel

Save

Heat Level 3
Heat Level 2
Heat Level 1
AC Level 1
AC Level 2
AC Level 3
Fan Level 1
Fan Level 2
Fan Level 3

Disconnection threshold (When heat, AC or fan is turning on, but the Kumostat is not properly connected to HVAC, it will detect this and shut itself down to preserve battery. Lower threshold value makes it more likely to detect disconnection. Increase this if you receive false "disconnected from wall" warning.)

Cancel

Associate a Wireless Tag

Please pull out battery insulating tape from one unassociated Wireless Tag. Light should be flashing on the Tag. Please remove the tape and associate a Tag one at a time.
For water/mositure sensors ...

Do not leave more than one tag flashing!

Cancel